Build Your Own Cheap Computer

Assembling your own computer using cheap computer parts has become very popular. It is very economical. Also the process will make you familiar with your system and to know more about making a computer in general.

It is to be kept in mind that the available parts are of different makes and designs, but basic principles of assembling are the same.

But, before proceeding to assemble the computer, you should be equipped yourself with the necessary tools, as described below:

  • Anti static wrist strap: The first precaution you have to take is to prevent static electricity from damaging the computer parts such as Processor (CPU), Hard Drive, Memory, Main Board Chips, Expansion cards etc.

  • Computer tools Guide: It is essential for you to go for a good computer tools Guide, and procure tools as required.

  • Plastic ties wrap to tie the cables together.

  • Cardboard sheets to use as a working surface to prevent static electricity cause damage while you are at work.

    • SAFETY PRECAUTIONS

    o Read a computer guide to get useful information, for making a computer that suits your requirement.

    o Prepare a list of parts you require before making the purchases.

    o Prefer a large hard drive as you can possibly afford, so as to allow future expansion.

    o Make sure that the parts you purchase are compatible with the system, you are planning to make.

    o Keep the parts in anti-static bag, to reduce damage caused by static electricity, until you are ready to assemble them in the system.

    o Ensure that you are fixing the parts at the appropriate places. Never use force to insert them, as the parts will get damaged. Make sure that the procedure you are adopting is proper and apt.

    o You should take extra care before connecting power supply to your system, as the voltage will be very high inside.There is possibility of the parts getting damaged. Never work on your computer with the power switched on.

    NOW LET US EXAMINE THE PROCEDURE

    o Acquire the necessary parts

    o Prepare the case.

    o Examine the Motherboard

    o Install the Computer Processor (CPU)

    o Install Memories

    o Install internal Drives

    o Install the Motherboard in the computer case

    o Connect the Computer front panel switches / LEDs / Speaker.

    o Connect ATX -20 Pin power supply cable to Motherboard

    o Install computer video cards

    o Install computer sound card

    o Connect computer peripheral to back panel

    o Post Assembly check

    o Configure the Motherboard bios

    o Test run the system

    o Partition and format Hard Drive

    o Install computer operating system

    SOME USEFUL INFORMATION

    Regardless of your education and experience, you can assemble and affordable computer, with the help of GUIDES available in the market.These GUIDES provide you with information of the following:

  • Where to get the parts and accessories

  • Basic knowledge about the parts and how they work

  • How to install the operating system

  • How to execute the final checks after assembling

    • - Post Time: 12-17-15 - By: http://www.rfidang.com