For more info:
http://legacysecuritygroup.com/index.php/categories/9-rfid/7-proxmark-3-emulating-hid-tags-in-standalone-mode
Compare to non rdv model:
D read(red2)
C bank 1(red1)
B emulate(green)
A bank 2(orange)
C and d record to bank 1
C and b emulate bank 1
A and d record to bank 2
A and b emulate bank 2
Instructions:
Long press button
Lights flash enter standalone
C stays lit
Longpress button until d lights
Place card on antenna to be read
D goes off when card is read
Short press button
B and C is lit
Card is being Emulated
UPDATE: Newer versions of the proxmark3 firmware default to emulating HF tags. I have pre-compiled the latest firmware for you with LF emulation enabled again by default. http://exploit.agency/sploit/proxmark3_with-LF_standalone Just flash the bootrom and fullimage elf files. I also included the flash utilities but they can be downloaded from the links in the proxmark forum as well if I missed any dependencies etc. This is the latest version as of 9-19-2016
This new firmware also adds standalone cloning. Also posted are several other firmware including proxbrute for brute forcing HID tags.
When only C is lit and has already captured/stored a card to bank 1:
Hold button down until C and A are lit, place T5577(or equivalent) card on LF Antenna
Release button, A and D blink and go out and C remains lit
This bank has now been cloned to the T5577 card
Also in the proxmark3 client it is referred to as Bank0(my Bank1) and Bank1(my Bank2).
- Post Time: 02-23-17 - By: http://www.rfidang.com