This multi-functional prelaminated sheet Inlay tester is specially designed for contactless card Inlay production, which can automatically test R/W function for ISO14443, ISO15693 transponders during the process of Inlay production. Also, could make the encoding job for card initialization and even personalization if connect to PC.
There are 4 working models for your job.
1) Chip UID fast testing during inlay manufacturing. May find the defective bonding chips (antenna and chip bonding). For bad ones, you may rework it manually. Improve your yield
2) Chip UID fast testing for prelam or laminated final card’s sheet. With this function, you can sort out & mark the bad function chips on sheet. Machine can statistic total input qty and good qty. Improve working efficiency
3) Full chip memory R/W testing on sheet. May test all chip sectors and blocks after final sheet lamination process. Sometimes, chip UID could be readable, but the memory was destroyed after lamination. Need to sort out & mark the bad ones before card sheet punch. With this testing, may improve our working efficiency and card quality control.
4) Initialization encoding into each chip on sheet. After the final sheet lamination and before card punch, may initialize/encode the chips with the same data. Off course, may find the bad function’s chip during the encoding process.
5) Variable data encoding into each chips on sheet. Actually, this is the real personalization encoding. Can execute the job on the final laminated sheet before card punch. With this mode, all perso datas will be transmitted from PC software to cards via this machine one by one card.
- Post Time: 03-26-16 - By: http://www.rfidang.com